BRZ/FR-S/GT86 Rear Toe Link

How hard could it be to design a toe link?  Not very if you just want something to “get the job done.”  However, we believe in being thorough, so we have spent nearly a hundred hours thinking through all the details.  These were our design objectives:

1. It had to be adjustable.  Changing the car’s ride height changes its static toe setting.  The adjuster was also placed in a location the user can easily access at all times, because nothing is more frustrating than struggling to fit a spanner to make adjustments.  So it could work with any ride height, it was designed to fit a modular shank to adjust the ride-steer curve for any height.

2. It had to be strong.  We created a list of over twenty potential rod ends and our toe links were designed around the rod ends, which means they can handle over 7000 lbs of load without failure.

3. It had to be stiff.  While others may discuss strength-to-weight ratio in design, when it comes to suspension, the stiffness-to-weight ratio is the key to better driving feel.  By increasing the stiffness over OEM, there is less compliance in the suspension, and less compliance means more feedback for the driver.

4. It had to last.  We selected materials that would be corrosion resistant for low-maintenance.

5. It had to be light.  It needed to be lighter than OEM and every ounce was accounted for.  We ran through multiple design iterations using multiple materials to produce the lightest product that met our design requirements.

This is the rendering of our BRZ/FR-S Rear Toe Link design

Rear Toe Rod
This product was designed with the end user in mind, so the user can “set it and forget it.”  The materials were carefully chosen for maximum performance and longevity.  The assembled toe rod should weigh just under 1.5 lbs.

The toe rod and rod ends are made of aircraft grade aluminum for its stiffness-to-weight and strength-to-weight.  The shank and bump steer shims are made of stainless steel for its strength.  Even the nuts are made from stainless to ensure the part never seizes, especially important for people who live in the salt belt that daily drive their car.

Our parts are made in the US by ISO 9001 certified manufacturers to ensure quality.  We expect to receive our first prototype by the end of the month.  Stay tuned.


Leave a Reply

Fill in your details below or click an icon to log in: Logo

You are commenting using your account. Log Out /  Change )

Google photo

You are commenting using your Google account. Log Out /  Change )

Twitter picture

You are commenting using your Twitter account. Log Out /  Change )

Facebook photo

You are commenting using your Facebook account. Log Out /  Change )

Connecting to %s