First, parts for the BRZ/FR-S/GT86. A replacement AT paddle shifter
The paddle will be 40 mm taller overall, 25 on the top side and 15 on the bottom. The bottom can not be made any taller without running into the cruise control stalk. However, this should still be large enough to be able to shift with your hands at the 2 and 10 o’clock position or 5 and 7 o’clock position. If we can reuse the OEM electronic box, we will have a core exchange program. If we cannot reuse the OEM electronic box, we will make a custom box, and try to create an adjustable spring tension system for those who want to a heavier shift feel and would like to customize it to their preference.
We are also making two shift knobs: a Delrin piece
It will be about 55 mm tall, 50 mm in diameter, and weigh about 215 g (slightly heavier). We were also commissioned to create a SR20DET to E30 swap tach signal converter. We were going to use an off-the-shelf enclosures but they were all too large for our liking
Unhappy with this solution, we are creating a custom enclosure. The part will be made of billet aluminum, with a machined down bread board, Deutsch motorsport connectors with flying leads. This is a rendering of what it what Zach is thinking of making