Tag Archives: cnc machining

Midwest Tour

So I’ve been travelling the Midwest the past few days to visit some of our manufacturers.  First, I went to see our suspension parts being made.  They have a large facility with a lot of CNC 3 and 5 axis machines, lathes, mills, benders, water jet, and welding stations.  This is only about 1/3 of the whole shop floor.

IMG_8241

IMG_8242They can do just about anything you can think of

IMG_8239Being able to do MIL-spec work, they are certified in just about every material, which shows in the stock they have

IMG_8243I have been discussing with them the idea of building our radiators and oil coolers.  They showed me the Denso core we would end up using for the FR-S/BRZ/GT86.

IMG_8245Then I went to visit our in autoclave composite manufacturer.  The tool for our SEW V2

IMG_8317Their large autoclave is 10’x20′, and is one of the largest in the country.

IMG_8312They work with teams at the highest levels of racing in the US as can be seen here

IMG_8326Since they had a bunch of defense projects laying around, I wasn’t able to take more pictures due to security reasons.  Then, I got to catch up with some of my old college friends and was told they were going to a 7 post rig test at ARC, so I watched that as well.

20130516_144147ARC also has a wind tunnel testing facility, but the team I was visiting didn’t have any wind tunnel time booked, so I didn’t get to see that.  Because the body panels were off the car and the guts were exposed, I couldn’t get any pictures of the car on the rig.  Sorry.  It’s been a very enlightening last few days, but I can’t wait to get back home tomorrow.